Long Life Design (SWCL)

Type A - Welded shaft design, with length compensation

Type B - Welded shaft design, without length compensation

Type C - Short flanged design, without length compensation

Flange bolthole patterns

type	data design item		SWCL 225	SWCL 250	SWCL 285	SWCL 315	SWCL 350	SWCL 390
A	L		960	1010	1150	1300	1420	1570
	LV		140	140	140	140	200	200
	m(kg)		130	185	255	360	510	680
B	L		630	690	770	870	970	1090
B	m(kg)		100	140	200	280	400	550
C	L		600	640	720	800	880	1000
C	m(kg)		105	135	200	270	365	940
Tn（kN·m）			40	56	80	120	160	225
Tf（kN·m）			20	28	40	58	80	110
β(°)			15	15	15	15	15	15
D			225	250	285	315	350	390
Df			250	285	315	350	390	435
D1			218	245	280	310	345	385
D2(H9)			140	175	175	220	250	280
D3xδ			180×7.5	203×7.5	219×9.0	245×11	273×11.5	299×15
Lm			150	160	180	200	220	250
K			20	20	22	25	28	32
t			6	7	7	8	8	10
n			8	8	8	10	10	10
D(+0.2)			18.1	20.1	22.1	22.1	24.1	27.1
mL(kg)			3.19	3.62	4.66	6.35	7.42	10.51
Flange bolt		size	M18	M20	M22	M22	M24	M27
Flange bolt		（N m） Tightening torque	372	526	710	710	906	1340

1. Notations:
L = Standard length, or compressed length for designs with Length compensation;
Lv = Length compensation;
m = Weight;
Tn = Nominal torque;
Tf = Fatigue torque, i.e. permissible torque as determined according to the fatigue strength under reversing loads;
β= Maximum deflection angle;
δ＝Thickness of the tube;
mL＝ weight per 100mm tube.
2. Millimeters are used as measurement units except where noted;
3. Please consult us for customizations regarding length, length compensation and flange connections.
(DIN or SAE etc.)

more...

Dear customer:
Thank you for your concern and support!

If you wish to have more information about our products and services, or have any comments or suggestions, please fill out the form after submission;or send direct mail to office@bcwxz.com,
We will give serious consideration and necessary reply.